 |
 |
 |
|
The BX46 is specifically designed to meet the demands of repetitive routine microscopy. This ergonomic screening microscope is focused via a moveable objective nosepiece rather than by moving the stage. The stage is fixed in a very low position, allowing the user to rest his or her arm on the desk when moving specimens. This greatly reduces fatigue and pain when using the microscope for long periods. Ideal user posture is further encouraged by the three-dimensional adjustability of the new observation tube, making the BX46 extremely comfortable for continuous daily use.
Optical system
UIS2 optical system
Focus
Coaxial coarse and fine focus with nose piece up down mechanism
Focus stroke 25 mm
Coarse stroke 15 mm/rotation
Fine stroke 100 μm/rotation
Graduation on fine focus 1 μm
Prefocusing limit stopper and torque adjustment on coarse focus
Illuminator
Built-in Koehler illumination for transmitted light
Light Manager with individual light intensity settings for all objectives
High color reproductivity LED light source
Optional: 6 V 30 W halogen bulb (pre-centered)
Revolving nosepiece
Fixed reversed quintuple nosepiece with encoding
Observation tube
Widefield tilting, telescopic and lifting binocular, inclined -3°-27°
Widefield tilting trinocular, inclined 5°–35°
Widefield trinocular, inclined 30°
Widefield erect image trinocular, inclined 30°
Widefield tilting binocular, inclined 5°–35°
Widefield ergo binocular, inclined 0°–25°
Widefield binocular, inclined 30°
Stage
Ceramic-coated coaxial stage with left or right hand low drive control, with rotating mechanism and torque adjustment mechanism (Low torqe, Plain, Rotating stages are also available)
Condenser
Built-in condenser (N.A. 0.9) 1.25 x–100 x (swing out: 1.25 x–2 x)
Operating environment
Indoor use
Ambient temperature : 5 º to 40 ºC (41 º to 104 ºF)
Maximum relative humidity : 80 % for temperatures up to 31º C (88 ºF), decreasing linearly through 70 % at 34 ºC (93 ºF), 60 % at 37 ºC (99 ºF), to 50 % relative humidity at 40 ºC (104 ºF)
Supply voltage fluctuations : Not to exceed ±10 % of the normal voltage
|
|
|
 |
|
 |
|